Product Category: RGB Accessories
RGB Accessories such as spacer cables, T-ways and power injector supplies are needed to customize and efficiently run your lighting displays. Please refer to the guidelines described in our “RGB Accessory” and “Power & Data Management” video tutorials, or contact support@minleonusa.com.
For the new RGB+2 DoubleDATA strings. Connect to any WEC or NDB output port. Then set your controller's configuration to RGB+2.
For the Rainmin RGB product lines, power up to 200, dual RGB-LED 24V pixels, across 200-feet. Will also power larger lamps in less quantities and distance.
For the Rainmin RGB product lines, power up to 180, dual RGB-LED 24V pixels. Will also power larger lamps in less quantities and distance. Use inline in a single direction with Power T. Or power a WEC with a Basic T, back-feeding power to the controller while you power forward to the lights. Do not cross voltage-RGB-LEDs do not like to receive power from both directions, and this will decrease their lifespan and potentially cause data latency.
Power up to 100, 12V dual RGB-LED pixels, at 12" spacing, or 125-feet at pitches less than 12". Will also power larger 12V lamps in lesser quantities.
Inline power injection T-way after 100L or 100-feet (12V strings), whichever comes first, or 180-200L with 24V strings. Isolates power forward, to prevent crossing voltage in the installation.
Smart T's give individual control of RGB strings. Add strings to each NDB output, or add outputs to the WEC+2.